PPG Paints
Find paint & wood stains for your next project.
Product Type
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
AMERLOCK 2 - Part A (Base)
- Amerlock 2 is a 2-component product. Both component A and B are required for use.
- High performance self priming universal epoxy
- High solids, low VOC
pmc
AMERLOCK® 600 - Part A (Base)
- Multi-purpose, self-priming epoxy
- Compatible with a wide range of substrates
- Suitable for use as an intermediate coat over zinc-rich primers
pmc
AMERLOCK 400 - Part B (Hardener)
- Compatible with prepared, damp surfaces
- Good adhesion on most existing coatings
- Good resistance to splash and spillage of chemicals
pmc
AMERLOCK 2 - Part B (Hardener)
- Amerlock 2 is a 2-component product. Both component A and B are required for use.
- High performance self priming universal epoxy
- High solids, low VOC
pmc
AMERLOCK SEALER - Part A (Base)
- AMERLOCK SEALER is a multi-component product. All components are required for use.
- High solids, low VOC
- Solvent-free
pmc
AMERLOCK 2 VOC - Part A (Base)
- Compatible with adherent rust remaining on prepared surfaces
- High performance coating for new or old steel
- VOC compliant for <100 g/L specifications
pmc
AMERLOCK SEALER - Part B (Hardener)
- AMERLOCK SEALER is a multi-component product. All components are required for use.
- High solids, low VOC
- Solvent-free
pmc
AMERLOCK 400 AL - Part B (Hardener)
- AMERLOCK 400 AL is a multi-component product. All components are required for use.
- Can be overcoated with a wide range of topcoats
- Low VOC
pmc
AMERSHIELD VOC - Part A (Base)
- AMERSHIELD is a 2-component Product. All components are necessary for use.
- Tough, flexible and abrasion resistant
- Unique, high-solids, high build coating
pmc
AMERSHIELD - Part B (Hardener)
- AMERSHIELD is a 2-component Product. All components are necessary for use.
- Tough, flexible and abrasion resistant
- Unique, high-solids, high build coating
pmc
AQUAPON WB | 98-1 SERIES - Part A (Base)
- Suitable for floors and vertical surfaces.
- Impact, mar, and abrasion resistant
- Low odor, soap and water clean up
pmc
AQUAPON® WB EP - Part B (Hardener)
- Impact, mar, and abrasion resistant
- Low odor, soap and water clean up
- Low VOC
pmc
AQUAPON® | 97-130 Series
- Excellent chemical resistance for splash & spill areas
- Good abrasion resistance
- Spray, brush and roller application
pmc
AQUAPON® | 97-670 Series
- >90% zinc in dry film
- Fast dry times for rapid topcoating
- Provides outstanding corrosion resistance
pmc
AQUAPON® WB EP - Part A (Base)
- Impact, mar, and abrasion resistant
- Low odor, soap and water clean up
- Low VOC
pmc
AQUAPON WB | 98-1 SERIES - Part B (Hardener)
- Suitable for floors and vertical surfaces.
- Impact, mar, and abrasion resistant
- Low odor, soap and water clean up
pmc
DIMETCOTE 9 H - Part A (Base)
- Good abrasion resistance
- Provides outstanding corrosion resistance
- VOC Compliant <2.8 lb/ gal
pmc
DSP 3 - Part B (Hardener)
- DSP 3 is a multi-component product. All components are required for use.
- Suitable for high speed welding
- Zero VOC formulation
pmc