PPG Paints
Product Type
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Find paint & wood stains for your next project.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
PPG Flooring™ Pumadur DP
- Resin rich - easier and quicker to apply than trowel applied screeds
- Seamless surface
- Variable Slip resistance through a choice of size and profile of the aggregates
pmc
PDUPKDPTXF/EA
NOVAGUARD™ 7350
- Rapid cure and return-to-service
- Good chemical and heat resistance
- Spray, brush and roller application
pmc
445044-A/01;445044-B/32
PPG Flooring™ 682 MMA Sealer Resin
- Rapid cure and return-to-service
- Excellent adhesion to concrete
- Resistant to water and chemicals
pmc
FLR682-A/05
PPG FLOORING SELF-LEVELING EPOXY - Kit
- Easy to apply, self-leveling
- Excellent adhesion and abrasion resistance
- Solvent free
pmc
FLR600-0/3U;FLR600-20/3U;FLR600-210/3U;FLR600-3/3U
PPG Flooring™ 2600 LS
- Monolithic - Seamless Surface
- Excellent Chemical Resistance
- Applicator Friendly – Easy To Apply
pmc
445186-C/66
SFT 650
- 1.05 coefficient of friction - wet or dry
- Resists oil, gasoline, acids, caustics, and most solvents
- Vehicular grade anti-slip
pmc
SFT650-02/21;SFT650-15/21;SFT650-15/29;SFT650-60/21
PPG Quick Mender® X.O.
- Ultra Low Viscosity in Neat Configuration Will Penetrate Concrete for Permanent Bond
- Cures in 30 Minutes for Quick Open to Traffic
- Will Cure at -30°F. Cure Time Will Be Extended at Lower
pmc
QMXO-A/01;QMXO-A/04;QMXO-B/01;QMXO-B/04
PPG Flooring™ 412 CS Coating System
- Easy application
- Excellent adhesion
- In accordance with EOS/ESD Association 7.1 Standard
pmc
412CON-A/05;412CRTC-2/05;412CSGP-B/01;412CSTC-2/05;412ESD-A/05
PPG FLOORING SELF-LEVELING EPOXY - Part A (Base)
- PPG FLOORING SELF-LEVELING EPOXY is a multi-component product. All components are required for use.
- Excellent adhesion and abrasion resistance
- Solvent free
pmc
FLR600-0/05;FLR600-20/05;FLR600-210/05;FLR600-3/05
PPG Flooring™ ICO Glaze CR
- Two-part, 100% solids, zero VOC epoxy wall and ceiling coating
- Seals block walls and other porous CMU surfaces without use of any block fillers
- Applied by brush, roller or spray at 20-30 mils total dry film thickness
pmc
513111B-A/01;513111B-B/01;51311WBF-A/01;51311WBFB/01;51311WT-A/01;51311WT-B/01;51314WB-A/05
PPG Flooring™ 833 CR
- Rapid cure and return-to-service
- FDA/USDA compliant for incidental food contact
- Excellent chemical resistance
pmc
445049-B/01;445253-C/66;447017-A/03;447018-B/01;455033-A/03
SFT 610 - Kit
- Fine texture finish for easy cleaning
- Resists oil, gasoline, acids, caustics, and most solvents
- Suitable for recreational marine and industrial environments
pmc
SFT610-02/21;SFT610-04/21;SFT610-15/21;SFT610-60/21
Thinner 21-85 / 97-739
- Available in different pack sizes
- Recommended usage per specific product datasheet
pmc
97-739/01;97-739/04;97-739/05
Thinner 50-63 / 97-736
- Available in different pack sizes
- Recommended usage per specific product datasheet
pmc
97-736/01;97-736/05
95-217 | BLOCK FILLER
- Can be topcoated with epoxy or waterborne topcoats
- HAPs - free as supplied
- Waterproofs and seals
pmc
95-217/05
Thinner 91-31 / 97-734
- Available in different pack sizes
- Recommended usage per specific product datasheet
pmc
97-734/01;97-734/05
Thinner 91-30 / 97-730
- Available in different pack sizes
- Recommended usage per specific product datasheet
pmc
97-730/01
Thinner 91-25 / 97-725
- Available in different pack sizes
- Recommended usage per specific product datasheet
pmc
97-725/01;97-725/05;97-725/55
