PPG Paints
Product Type
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Find paint & wood stains for your next project.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
METALHIDE ONE PAC | 97-676
- Excellent for use in coastal, marine, or off-shore environments
- Provides outstanding corrosion resistance
- Single component that can be partly used and resealed for future
pmc
97-676/01
MULTIPRIME 4160
- Ideal for structural steel, tank exteriors, piping and equipment
- Lead and chromate free
- Rust Inhibitive interior/exterior alkyd primer
pmc
4160-1000/01;4160-1000/05;4160-1000/55;4160-1000C/01;4160-1000C/05;4160-6120/01;4160-6120/05;4160-6120/55;4160-6120C/01;4160-6120C/05;4160-6125/55;4160-7100/01;4160-7100/05;4160-7100C/05
MULTIPRIME 4360
- Excellent corrosion resistance
- May be topcoated with high performance coatings
- May be used on both ferrous and galvanized metal
pmc
4360-1000/01;4360-1000/05;4360-1000/55;4360-1000C/01;4360-1000C/05;4360-5019/55;4360-6120/01;4360-6120/05;4360-6120C/01;4360-6120C/05;4360-7100/01;4360-7100/05;4360-7100C/01;4360-7100C/05
MULTIPRIME EDF FAST DRY PRIMER - Part A (Base)
- MULTIPRIME EDF FAST DRY PRIMER is a multi-component product. All components are required for use.
- Fully 2.8 VOC compliant
- Low Temperature Cure -- cures down to 40ºF (4.4ºC)
pmc
94-109/01
MULTIPRIME EDF FAST DRY PRIMER - Kit
- Fast drying primer- recoat in two hours
- Fully 2.8 VOC compliant
- Low Temperature Cure -- cures down to 40ºF (4.4ºC)
pmc
94-109/2U
MULTIPRIME EDF FAST DRY PRIMER - Part B (Hardener)
- MULTIPRIME EDF FAST DRY PRIMER is a multi-component product. All components are required for use.
- Fully 2.8 VOC compliant
- Low Temperature Cure -- cures down to 40ºF (4.4ºC)
pmc
94-128/01
PPG NOVAGUARD® 5041 Coating
- 100% solids
- Easy clean
- Resists concentrated acids, caustics and some solvents
pmc
504111-A/01;504111-B/01;504112-A/01;504121GF-A/05;504121GF-B/05;504141-A/05;504141.5-B/02;504141GF-A/05
PPG NOVAGUARD® 5090 Epoxy Filler - Kits
- Can fill holes up to 1” (2.5 cm) thick on vertical or overhead surfaces without shrinkage or sagging
- Bonds to dry and damp concrete
- Self priming on concrete and steel
pmc
509001/1U;509001/3U;5090101/1U;5090101/5U;50903/1U
PPG NOVAGUARD™ 5031
- Ultra High Solids
- Excellent chemical resistance
- Excellent resistance to acids, caustics, detergents and other corrosive materials
pmc
503110-B/01;503110F-B/04;503111-A/01;503111F-A/01;503141-A/05;503141.5/5U;503372-A/05;503372-B/01
NOVAGUARD 810 ER
- Good chemical resistance against wide range of chemicals/solvents
- Rapid cure and return-to-service
- Smooth finish and light color for easy cleaning and inspection
pmc
NG810-8B/05;NG810-9B/05;NG810-NB/05;NG810E-13/25;NG810E-2/25;NG810E-35/05;NG810E-35/25;NG810E-502/05;NG810E-502/25;NG810E-72/05;NG810E-72/25
NOVAGUARD 840 - Part B (Hardener)
- One-coat tank coating system
- Reduced explosion risk and fire hazard
- Suitable for use on primed steel or direct to concrete/masonry
pmc
6N364645B/01;6N364646B/01;6N373339B/55
NOVAGUARD 890
- Easy to clean
- Excellent pit filling capabilities
- Good chemical resistance against wide range of chemicals/solvents
pmc
6N3646471/5U;6N3646473/05;6N3646475/5U;NG890-1/DU;NG890-1B/01;NG890-1B/55;NG890-3/55;NG890-5B/01
PPG NOVAGUARD® 6850
- Excellent chemical resistance for splash & spill areas
- Excellent adhesion to concrete and steel
- Rapid cure and return-to-service
pmc
447241-A/01;447242-B/32
PPG NOVAGUARD® 6200 Grout Resurfacer
- Excellent Chemical Resistance
- Deep Penetrating Primer – Excellent Adhesion
- Temperature Resistant – Up To 210°F
pmc
445424P/66;445425P/01;445500/32;445505/04;445577-A/05;445578-B/08
NOVAGUARD 840 - Kit
- One-coat tank coating system
- Reduced explosion risk and fire hazard
- Suitable for use on primed steel or direct to concrete/masonry
pmc
6N3646441/5U;6N3646445/5U;NG840-1/DU
PPG NOVAGUARD® 5090 Epoxy Filler - Components
- Can fill holes up to 1” (2.5 cm) thick on vertical or overhead surfaces without shrinkage or sagging
- Bonds to dry and damp concrete
- Self priming on concrete and steel
pmc
5090-3A/02;5090-3B/04;5090-3C/01;5090-C/01;5090-C/05;509001-A/02;509001-A/05;509001-B/01;509001-B/04;5090101-A/02;5090101-A/05;5090101-B/01;5090101-B/04
NOVAGUARD 840 - Part A (Base)
- One-coat tank coating system
- Reduced explosion risk and fire hazard
- Suitable for use on primed steel or direct to concrete/masonry
pmc
6N3646443/05;6N3733383/55
PHENGUARD 965 - Kit
- Can be applied and cures at temperatures down to 5°C (41°F)
- Easy to clean
- Excellent resistance to a wide range of organic acids, alcohols, fats (regardless of free fatty acid content)
pmc
6F1992827/5U;6F1992842/5U