PPG Paints
Product Type
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Find paint & wood stains for your next project.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
KL9600 Series KeeLock Hi-Solids Epoxy Coatings
- A primer/finish that provides barrier type protection
- Can be used as primer over marginally prepared steel or concrete
- High solids formulation
protective
KL9600B/02, KL96006002/05
KL6040 Tri-polar Primer
- VOC compliant
- Use as a primer for structural steel, tanks, piping, transmission and communication towers, conveyors, equipment and other similar surfaces
protective
KL6060/05, KL6040/01, KL6060/01, KL6040/05
KL3700 Kolor Poxy Thinner
- Available in different pack sizes
- Recommended usage as per specific product datasheet
protective
KL3700/05, KL3700/55
METALHIDE ONE PAC | 97-676
- Excellent for use in coastal, marine, or off-shore environments
- Provides outstanding corrosion resistance
- Single component that can be partly used and resealed for future
protective
97-676/01
MULTIPRIME 4160
- Ideal for structural steel, tank exteriors, piping and equipment
- Lead and chromate free
- Rust Inhibitive interior/exterior alkyd primer
protective
4160-6125/55, 4160-6120/55, 4160-6120C/01, 4160-1000C/01, 4160-7100C/05, 4160-6120C/05, 4160-1000C/05, 4160-1000/55, 4160-6120/01, 4160-1000/01, 4160-7100/01, 4160-7100/05, 4160-6120/05, 4160-1000/05
MULTIPRIME 4360
- Excellent corrosion resistance
- May be topcoated with high performance coatings
- May be used on both ferrous and galvanized metal
protective
4360-6120C/01, 4360-1000C/01, 4360-7100C/01, 4360-6120C/05, 4360-1000C/05, 4360-7100C/05, 4360-5019/55, 4360-1000/01, 4360-7100/01, 4360-6120/01, 4360-1000/05, 4360-6120/05, 4360-1000/55, 4360-7100/05
MULTIPRIME EDF FAST DRY PRIMER - Kit
- Fast drying primer- recoat in two hours
- Fully 2.8 VOC compliant
- Low Temperature Cure -- cures down to 40ºF (4.4ºC)
protective
94-109/2U
PPG NOVAGUARD® 5041 Coating
- 100% solids
- Easy clean
- Resists concentrated acids, caustics and some solvents
protective
504141.5-B/02, 504141-A/05, 504121GF-A/05, 504121GF-B/05, 504112-A/01, 504111-B/01, 504141GF-A/05, 504111-A/01
PPG NOVAGUARD® 5090 Epoxy Filler - Kits
- Can fill holes up to 1” (2.5 cm) thick on vertical or overhead surfaces without shrinkage or sagging
- Bonds to dry and damp concrete
- Self priming on concrete and steel
protective
509001/3U, 509001/1U, 50903/1U, 5090101/1U, 5090101/5U
PPG NOVAGUARD™ 5031
- Ultra High Solids
- Excellent chemical resistance
- Excellent resistance to acids, caustics, detergents and other corrosive materials
protective
503141.5/5U, 503141-A/05, 503110-B/01, 503111-A/01, 503372-B/01, 503110F-B/04, 503372-A/05, 503111F-A/01
NOVAGUARD 810 ER
- Good chemical resistance against wide range of chemicals/solvents
- Rapid cure and return-to-service
- Smooth finish and light color for easy cleaning and inspection
protective
NG810E-72/05, NG810E-502/05, NG810-NB/05, NG810E-35/05, NG810-8B/05, NG810-9B/05, NG810E-35/25, NG810E-502/25, NG810E-2/25, NG810E-13/25, NG810E-72/25
NOVAGUARD 840 - Part B (Hardener)
- One-coat tank coating system
- Reduced explosion risk and fire hazard
- Suitable for use on primed steel or direct to concrete/masonry
protective
6N364645B/01, 6N364646B/01, 6N373339B/55
NOVAGUARD 890
- Easy to clean
- Excellent pit filling capabilities
- Good chemical resistance against wide range of chemicals/solvents
protective
NG890-1/DU, NG890-5B/01, NG890-1B/01, 6N3646473/05, 6N3646475/5U, 6N3646471/5U, NG890-3/55, NG890-1B/55
PPG NOVAGUARD® 6850
- Excellent chemical resistance for splash & spill areas
- Excellent adhesion to concrete and steel
- Rapid cure and return-to-service
protective
447242-B/32, 447241-A/01
PPG NOVAGUARD® 6200 Grout Resurfacer
- Excellent Chemical Resistance
- Deep Penetrating Primer – Excellent Adhesion
- Temperature Resistant – Up To 210°F
protective
445500/32, 445577-A/05, 445578-B/08, 445424P/66, 445505/04, 445425P/01
NOVAGUARD 840 - Kit
- One-coat tank coating system
- Reduced explosion risk and fire hazard
- Suitable for use on primed steel or direct to concrete/masonry
protective
6N3646445/5U, 6N3646441/5U, NG840-1/DU
PPG NOVAGUARD® 5090 Epoxy Filler - Components
- Can fill holes up to 1” (2.5 cm) thick on vertical or overhead surfaces without shrinkage or sagging
- Bonds to dry and damp concrete
- Self priming on concrete and steel
protective
5090-3B/04, 509001-A/05, 509001-B/01, 509001-B/04, 5090-3A/02, 5090-C/01, 509001-A/02, 5090101-A/05, 5090101-B/04, 5090101-A/02, 5090101-B/01, 5090-C/05, 5090-3C/01
NOVAGUARD 840 - Part A (Base)
- One-coat tank coating system
- Reduced explosion risk and fire hazard
- Suitable for use on primed steel or direct to concrete/masonry
protective
6N3646443/05, 6N3733383/55