Skip to Content

LIQUID NAILS® Paneling Wood & Foam Molding Interior Construction Adhesive


10 oz/300 mL (EA)

woman taping off wall for painting

Product Details

LIQUID NAILS® Paneling Wood & Foam Molding Adhesive (LN-606) is specially designed for projects like paneling and molding where instant hold is needed. The fast, sure hold of this construction adhesive provides precision placement and minimizes nailing. Twenty minute open time and an impact-resistant bond. This product is certified by UL Environment to meet the GREENGUARD Gold Standard as a low emitting material.


10 oz. Cartridge


30 Lineal ft. Using 1/4" Bead


ASTM C-557


  • Will not stain
  • Strong instant hold
  • Retains precise placement
  • Reduces nailing

Application Details

All panels must be separated and conditioned to room temperature for 48 hours prior to installation. Surfaces must be clean, dry and structurally sound. Cut and pre-fit materials prior to installation. Place Cartridge in gun, cut nozzle, and puncture inner seal with nail or wire. Apply a ¼” bead of adhesive around the perimeter of parts to be bonded. Adhere materials within 20 minutes of gunning adhesive. Warped materials may require bracing and/or nailing.


Paneling: Apply 1/4” bead of adhesive approximately 1” from edge of panel around the perimeter. Apply two zigzag 1/4” beads in the middle of the panel. Press panel firmly into place. Remove panel from wall for one minute. Rejoin panel to wall.

Molding: Apply 1/4” zigzag bead to back of molding. Press molding firmly into place. Starting at one end, nail every 12".

Looking for a datasheet? Access PPG's full datasheet portal here or visit

Code Sizes Download
5167227 10 oz/300 mL (EA)