Skip to Content

LIQUID NAILS® Drywall Advanced Interior Construction Adhesive


28 oz/800 mL (EA)

Pro opening paint can

Product Details

LIQUID NAILS® Drywall Advanced Construction Adhesive (DWP-40), features Nail Pop Minimizing Technology that reduces nail pops by up to 90%* and is specially formulated for interior drywall installation and correcting minor framing irregularities. Reduces fastener use up to 50%, grabs fast, bonds strong, and buffers sound. Certified by UL Environment to meet the GREENGUARD Gold Standard as a low emitting material.


28 oz. Cartridge 


88 Lineal ft. Using 1/4" Bead


ASTM C-557


  • Reduces nail pops by up to 90%
  • Buffers sound
  • Fast grab adhesive
  • Reduces fastener use up to 90%
*Compared to traditional latex drywall adhesives when finished after 24 hours at room temperature.

Application Details

Cut and prefit materials prior to installation. Cut nozzle to desired bead size marked on nozzle. Puncture inner seal with nail or wire. Important: For best results, set drywall onto adhesive within 15 minutes of application.

Walls: Apply a 1/4" adhesive bead directly onto studs and plates. Press drywall firmly against adhesive; adjust as necessary. Holding drywall’s outer edges, nail every 12" on outer edges and every 16" over studs in field of the panel. Fasten center of field with nails every 16" over studs.

Note: If studding is perfectly true, nailing inside field will not be required.

Ceilings: Apply a 1/4" adhesive bead to rafters. Fasten drywall’s outer edges with nails, 12" on center. Fasten center of field with a nail at each rafter.

Looking for a datasheet? Access PPG's full datasheet portal here or visit

Code Sizes Download
DWP-40 28 oz/800 mL (EA)