Skip to Content

HOMAX® Professional Grade Texture Gun & Hopper

Size

Each (EA)

woman taping off wall for painting

Product Details

Homax® Texture Gun & Hopper is a professional grade texture tool that applies interior wall texture and ceiling texture. Sprays most gravity-fed texture materials. Included 5-liter hopper holds dry mix textures or pre-mixed textures. Operates off a compressor, 2 hp or larger (min. 7cfm @25 psi). Includes an air shut off valve and 1/4 quick connect compressor connector, plus three 3 spray tips (4mm, 6mm and 8mm).

Features:

  • Wall texture gun and 5-liter hopper
  • Sprays multiple textures including orange peel, splatter, heavy splatter, knockdown and popcorn acoustic ceiling
  • Use with wall or ceiling dry mix textures or pre-mixed textures
  • For wall and ceiling repair or small remodels
  • Includes 3 standard spray tips (4mm, 6mm and 8mm) for multiple texture options

Application Details

  1. Mix material in a separate container. Average consistency should be similar to pancake batter. Material may be thicker or thinner depending on desired texture/pattern.
  2. Attach the hopper (#17) by tightening the clamp (#18). Fill with no more than 1.25 Gallons (5L) of material.
  3. Connect the air hose to the air inlet (#13) and set the pressure to 50-70 PSI. Do not exceed 70 PSI.
  4. Squeeze the trigger (#14) to test pattern.
  5. Spray from a distance of approximately 12” to 14”, maintaining distance as you spray.
  6. When you finish spraying, release the trigger (#14) and disconnect the air hose.
  7. Empty the hopper (#17). Do not store the hopper filled with material

Note: It is recommended that you test the Texture Gun on scrap material such as cardboard to become familiar with the available adjustments, prior to use.

Looking for a datasheet? Access PPG's full datasheet portal here or visit https://products.ppgac.com/

Code Sizes Download
HMX04670 Each (EA) N/A