Skip to Content

HOMAX® PRO GRADE® Interior Aerosol Ceiling Texture Popcorn - Water Based


16 oz/473 mL (EA)



Are you a pro? Use our new online ordering tool.
Pro opening paint can

Product Details

Homax® Pro Grade® Ceiling Texture technology is the latest innovation in ceiling aerosol textures. This professional tool features adjustment of pattern and vertical spray tip for ceiling application. The patented adjustable nozzle allows you to match your existing ceiling texture. The heavy-bodied knockdown formula is tinted for improved visibility during application and the no prime feature saves the pro time.


  • Ergonomic Grip – less fatigue
  • Trigger Actuator – easy application
  • Heavy-bodied
  • Low odor
  • Easy clean-up
  • No prime
  • Tinted for better visibility

Application Details

  1. Shake can upside-down vigorously until ball rattles, continue to shake for one full minute before use and continuously during use.
  2. Slidered trigger lock back, away from tip.
  3. Adjust pattern: Pointing away from face, turn yellow spray tip to desired pattern: clockwise for light, counter clockwise for heavy.
  4. Spray at a distance of 6” – 18” from ceiling using a circular (not sweeping) motion and working in 4’ x 4’ sections. Apply in random pattern, covering only 70-80% of surface. Shake can occasionally throughout use. Note: Depending upon pattern setting and temperature, distance may vary. Sprays best between 70-80*F. Run can under warm water to bring to room temperature.
  5. Knockdown: Allow texture to dry no more than 1-2 minutes before lightly knocking down or flattening using a 6” or larger wet drywall knife. For best results, hold knife almost parallel to the ceiling. Note: Texture appearance will improve dramatically after knocked down. If knife drags, shorten dry time. Texture can be scraped off and reapplied when wet until desired pattern is achieved.
  6. Dry Time: Allow to dry 60 minutes before painting. Heavier textures may require longer dry time, depending upon temperature and humidity. Texture lightens in color when dry. Clean Up: Warm water.
  7. After Use/To Store: Clear nozzle by turning can upside down, spray until texture is cleared. Release trigger completely, hold can body, and slide red trigger lock to click into lock position. Test to ensure lock is properly engaged.
  8. Paint with 2 coats or more from complete hide and to match gloss (dependent upon color and paint manufacturer’s instructions).

Looking for a datasheet? Access PPG's full datasheet portal here or visit

Code Finish Base Sizes Download
HMX04175 Flat Ready Mix White 16 oz/473 mL (EA)
HMX04575 Flat Ready Mix White 16 oz/473 mL (EA)