Your Favorites
Gallon/3.78 L (01), 5 Gallons/18.9 L (05), 1/2 Pint/236 mL (16) Edit
Flat, Eggshell, Satin, Semi Gloss Edit
TIMELESS® Interior Paint + Primer is an Easy To Clean One-Coat* Paint Formula with our newest innovations providing complete one coat* hide, coverage and durability. With PPG TIMELESS® Color Protect Technology, you get one coat* coverage in 1,000 colors and has the toughest, most wear-resistant finish.** Great for use in almost any painting project in your home, this interior paint & primer looks wonderful in many of our top paint colors. For more information on how to use this interior paint in your home, check out our How To Paint A Room guide.
Surface must be dry. Remove all loose, peeling paint, dirt, grease, and any other surface contaminants. Putty all nail holes and caulk all cracks and open seams. Sand all glossy, rough and patched surfaces. When applied to an uncoated substrate, two coats are required, with the first coat acting as the primer. Uncoated substrates, repaired surfaces or lightly stained areas may require additional coats. For severe stains, water marks, and other challenging conditions such as bare metal or chalky surfaces use the appropriate primer. WARNING! If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the USEPA National Lead Information Hotline at 1‑800‑424‑LEAD or log on to www.epa.gov/lead. Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.
Stir thoroughly. When using more than one can of the same color, intermix to ensure color uniformity.
DRYING TIME: Dry time @ 77ºF (25ºC); 50% relative humidity. To Touch: 1 hour To Recoat: 4 hours
CLEANUP: Clean brushes and tools with warm, soapy water
Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.
Looking for a datasheet? Access PPG's full datasheet portal here or visit https://products.ppgac.com/
As a member of our community, you’ll be first to get our special offers, all the details on our latest products, and of course, oodles of inspiring ideas!